| Parameter | Description | Values | Default | Set by | Read by |
|---|---|---|---|---|---|
| PARAM_ANALOG_COPY_PROTECTION | The value of analog copy protection level | Integer | - | LatensDaemon | - |
| PARAM_APP_BLANK_VIDEO | - | - | - | - | |
| PARAM_AUDIO_CODEC_TYPE | This parameter contains the audio codec type. | A string. | - | Application | - |
| PARAM_AUDIO_ENCODING_PRIO_LIST | Priority list for automatic audio encoding selection | comma separated list of encodings | - | MediaPlayer | - |
| PARAM_AUDIO_LANGUAGE_AUTO_SELECT | Used for enable or disable automatic audio audio language selection | Boolean ("true"/"false") | - | MediaPlayer (reading from infobroker) | - |
| PARAM_AUDIO_LANGUAGE_PRIO_LIST | Priority list for automatic audio language selection | comma separated list of language codes | - | MediaPlayer | - |
| PARAM_AUDIO_SAMPLING_FREQ | This parameter contains the audio sampling frequency. | A string. | - | Application | - |
| PARAM_AUDIO_TYPE_PRIO_LIST | Priority list for automatic audio mode selection | comma separated list of audio mode | - | MediaPlayer | - |
| PARAM_BITBAND_STBID | This parameter is used for communication with a Bitband VOD server. It represents the client ID in the RTSP setup message. | A string | - | URI or by using SetParameter() | - |
| PARAM_BLANK_VIDEO | The AVI Parameter among File Source, AVI and Payload Sink Elements. | A string. | - | AVI Element. | - |
| PARAM_BUFTIME | This parameter is used to change how much data (ms) to buffer before starting to play a non H.264 stream.If the value is set too low there is a risk that the buffers might be emptied because of network lag (this will cause the service to once again buffer up data again). If the value is set too high, on the other hand, the buffer might be filled too much giving a similar effect. Also the higher the value is set the longer it takes to start playing a stream, e.g. when switching TV channels. | 0 - 3000 ms | 500 ms | Streamer config, URI | - |
| PARAM_CGMSA | Indicates if CGMSA copy protection is enabled or not. | true, false | - | MediaPlayer | - |
| PARAM_CLOSED_CAPTIONING | Indicates if closed captioning is enabled or not. | true, false | - | MediaPlayer | - |
| PARAM_CLOSED_CAPTION_CHANNEL | Channel for Closed Captions. NOTE! Only available for VIP1200. | 1 - 8 | 1 | Streamer config, URI | - |
| PARAM_CLOSED_CAPTION_MODE | Set the Closed Captioning data mode. Valid values are 608 for EIA-608 captions (VIP1200/VIP1900), 708 for EIA-708 captions (VIP1200) and disable to disable Closed Captions. | 608, 708, disable | disable | Streamer config, URI | - |
| PARAM_CLOSED_CAPTION_OVERLAY | When this parameter is true Closed Captions will be rendered on the video by the STB. When this parameter is false Closed Captions will be output as VBI data in the video signal. This parameter only has an effect when Closed Captions are enabled by closedCaptionMode. NOTE! Only available for VIP1200. | true, false | false | Streamer config, URI | - |
| PARAM_CLOSE_BLACK | Controls if video should be blacked out or freezed when closed. | true, false | true | Application | - |
| PARAM_COMPONENT_OUTPUT | Indicates if component output should be enabled or disabled. | true, false | - | MediaPlayer | - |
| PARAM_CURRENT_CCI_MARKER_TOKEN | Indicates the most recently found CCI marker token in dvr playback. Cci marker tokens indicate when to set output control. | String | - | Source Element | - |
| PARAM_DECODER_SATURATION_TIME | The video decoder saturation time. | 0 - XXX. | - | Source element. | - |
| PARAM_DESCRAMBLER_KEYS_SET | This parameter is set to true when the CA system has set the descrambler keys, used by ProgramExtractorElement to control data postponement | The CRC32 of the ECM triggering the key change. | - | The CA system extension. | - |
| PARAM_DISCARD_RTP_HEADERS | If this parameter is set together with an igmp:// URI the incoming data is assumed to be RTP and the RTP header is discarded before the data is processed. This can be used to increase performance in the case where the RTP format is used on the network but the RTP functionality is not needed once the data reaches the STB. | true, false | false | URI | - |
| PARAM_DISTRIBUTION_ENCRYPTION_MODE | Controls if the encryption mode used for distribution. | clear, dtcp | clear | DLNA media server | - |
| PARAM_DIVX_DRM_FILE | Indicates if DivX DRM file is played back or not. | true, false | - | Avi File Source Element | - |
| PARAM_DRM_AUTHORIZED_FLAG | Indicates if DivX DRM authorization is enabled or not. | true, false | - | Avi File Source, PS-HW Elements | - |
| PARAM_DRM_RENTAL_FLAG | Indicates if DivX DRM rental is enabled or not. | true, false | - | Avi File Source Element | - |
| PARAM_DRM_USE_COUNT | The number of time the DivX file has been played back. | Integer | - | Avi File Source Element | - |
| PARAM_DRM_USE_LIMIT | The number of playbacks allowed for the DivX file. | Integer | - | Avi File Source Element | - |
| PARAM_DTCPIP_CONTENT_KEY | Contains DTCP/IP content key. | 16-byte binary | - | AKE service | - |
| PARAM_DTCPIP_IV | Contains DTCP/IP initialization vector. | 16-byte binary | - | AKE service | - |
| PARAM_DTCPIP_PACKET_HEADER | Contains the header of the current DTCP/IP packet. TDlnaSourceElement for playback sessions. | 14-byte binary | - | AKE service for distribution sessions, | - |
| PARAM_DTCPIP_PACKET_SIZE | Contains the size of the current DTCP/IP packet. | 0 - 128 MB | - | AKE service | - |
| PARAM_DTCPIP_SOCKETSINK_TRANSFER_STATE | 0 - transfer stopped, 1 - transfer started | - | Socket sink element | - | |
| PARAM_ENCODING_APS | Indicates if APS copy protection for encoding is enabled or not. | String | - | Analog Source Element | - |
| PARAM_ENCODING_CGMSA | Indicates if copy protection for encoding is enabled or not. | Integer | - | Analog Source Element | - |
| PARAM_ENCODING_MACROVISION | Indicates if Macrovision for encoding is enabled or not. | Integer | - | Analog Source Element | - |
| PARAM_ERROR_RECOVERY | The errorrecovery parameter determines how the STB will try to handle corrupt streams, e.g. in the case of packet loss. high means the STB will try to hide stream errors as much as possible. This may result in that instead of showing an area on screen with errors, an entire frame may be repeated (small picture freeze). NOTE! This is not available for VIP1200. | high, medium, low | high | Streamer config, URI | - |
| PARAM_HLS_CONTENT_TYPE | Content Type. Identifies the type of encrypted content. | LiveTV, VOD | - | Application | - |
| PARAM_HLS_DRM_TYPE | DRM Type. Identifies the type of DRM that has been used to encrypt the HLS content. This parameter enables the appropriate DRM daemon within the platform to respond to key decryption requests. | SecureMedia, Verimatrix, None | - | Application | - |
| PARAM_HLS_INITIAL_BANDWIDTH_LIMIT | Used by HTTP Live Streaming source element to know the maximum allowed bandwidth when selecting the initial variant. If the value is set lower than the lowest available variant, the lowest available variant will be used anyway. The unit is bytes per second. | 0 - XXX bytes / second | - | - | HLS source element |
| PARAM_HLS_LIVE_SEQUENCE_PADDING | Used by HTTP Live Streaming source element to know where to start playing a live stream. Normally the playback will start from the beginning of the playlist, but some servers do not keep media files after they have disappeared from the sliding window. This may cause playback to fail immediately or after a while when clocks have drifted. The solution to this is to start one or a few media sequences (files of approximately 10 seconds) into the stream. This parameter specifies how many sequences to add. An offset from the end of the sliding window can be specified by a negative padding. For example, -1 means the most recently added sequence. | An integer | -4 | - | HLS source element |
| PARAM_HLS_MEDIAFILE_URI | Used by HTTP Live Streaming source element to publish the currently playing chunk URI. | A URI string | - | HLS source element | - |
| PARAM_HLS_MEDIA_RATE | Used by HTTP Live Streaming source element to publish the currently used media rate. The unit is bytes per second. | 0 - XXX bytes / second | - | HLS source element | - |
| PARAM_HLS_MEDIA_RATE_LIST | Used by HTTP Live Streaming source element to publish the available media rates as a comma separated list. The unit is bytes per second. Note that this list may change during playback. If for instance a rate is discovered to be of an unsupported format, it will be removed from the list. | comma separated list of media rates | - | HLS source element | - |
| PARAM_HLS_TRANSFER_RATE | Used by HTTP Live Streaming source element to publish the measured network bandwidth. The unit is bytes per second. | 0 - XXX bytes / second | - | HLS source element | - |
| PARAM_INPUT_AUDIO_FORMAT | - | - | - | - | |
| PARAM_INPUT_AUDIO_PID | - | - | - | - | |
| PARAM_INPUT_PCR_PID | - | - | - | - | |
| PARAM_INPUT_STREAM_TYPE | - | - | - | - | |
| PARAM_INPUT_VIDEO_FORMAT | - | - | - | - | |
| PARAM_INPUT_VIDEO_PID | - | - | - | - | |
| PARAM_MACROVISION | Indicates if Macrovision copy protection is enabled or not. | true, false | - | MediaPlayer | - |
| PARAM_OPENED_AS_RECORDER | Is set to true if streamer is opened as a recorder only | true | - | Streamer Manager | - |
| PARAM_OPEN_TIMEOUT | Sets the timeout to wait before considering an open command to have failed. Note that this is currently only supported for the HTTP Live Streaming (HLS) source element and is valid only for the initial playlist download. | 0 - XXXXX ms | 5000 | URI | - |
| PARAM_OUTPUT_AUDIO_FORMAT | - | - | - | - | |
| PARAM_OUTPUT_AUDIO_PID | - | - | - | - | |
| PARAM_OUTPUT_PCR_PID | - | - | - | - | |
| PARAM_OUTPUT_STREAM_TYPE | The Transcoder output parameters. PARAM_OUTPUT_STREAM_TYPE PARAM_OUTPUT_VIDEO_PID PARAM_OUTPUT_AUDIO_PID PARAM_OUTPUT_PCR_PID PARAM_OUTPUT_VIDEO_FORMAT PARAM_OUTPUT_AUDIO_FORMAT | - | - | DLNA service. | - |
| PARAM_OUTPUT_VIDEO_FORMAT | - | - | - | - | |
| PARAM_OUTPUT_VIDEO_PID | - | - | - | - | |
| PARAM_PAUSE_BLACK | Controls if video should be blacked out or freezed when paused. | true, false | false | Application | - |
| PARAM_PMT_BASE64_DATA | DEPRECATED This parameter holds the current program map table used for transport streams. | Binary is encoded to Base64 format | - | TTsProgramSelectorElement | - |
| PARAM_PMT_DATA | This parameter holds the current program map table used for transport streams. | Binary data | - | TTsProgramSelectorElement | - |
| PARAM_PREFERRED_AUDIO_ENCODING | Preferred audio encoding selection which overrides PARAM_AUDIO_ENCODING_PRIO_LIST | encoding | - | Audio controller element | - |
| PARAM_PREFERRED_AUDIO_LANGUAGE | Preferred audio language selection which overrides PARAM_AUDIO_ENCODING_PRIO_LIST | language code | - | Audio controller element | - |
| PARAM_PREFERRED_AUDIO_LANG_DESCRIPTOR | Preferred audio language descriptor which overrides default behavior of using MPEG-2 ISO-639 Language Descriptor. | AC3/MPEG | - | Streamer Core | - |
| PARAM_PROXY_LIST | Contains the currently used proxy address by the system. | IP address | - | - | - |
| PARAM_PiP_MODE | Used for inform streamer element current player is in PiP mode or not. | Boolean ("true"/"false") | - | TVideoControllerElement | - |
| PARAM_RECORDING_TYPE | This parameter contains Recording type. Recording type may be AUDIO_ONLY or VIDEO_ONLY or AUDIO_VIDEO | A string. | - | Application | - |
| PARAM_RTSP_NOW | When this parameter is set to true, the RTSP play message will be issued with the range "npt=now-". This is only valid when playing a stream from a RTSP server that supports this feature. | true, false | false | URI | - |
| PARAM_SERVICE_ACQUIRED | This is the service acquisition status of a tune (QAM or IP) which indicates the successful programming of the tuner, and subsequent PAT and PMT acquisition. | true, false | false | TStreamer | - |
| PARAM_SOUND_MODE | Sound mode | currently "SPDIF" or != "SPDIF" | - | MediaPlayer | - |
| PARAM_STARTMODE | The parameter will configures how the streamer starts a stream. When the parameter is set to adaptive, the STB will show video in "slow motion" until A/V sync is correct. This can be useful when playing h264 streams with large A/V diff. When the parameter is set to normal, the STB will display a black image until audio and video are in sync. NOTE! VIP1500/1700 only support fast or normal mode. VIP1200 always use normal mode. | fast - Show a picture as fast as posible. normal - Don't show anything until A/V sync. adaptive - Show video in slow motion until A/V sync is correct. | normal | Streamer config, URI | - |
| PARAM_STATISTICS_BEFORE_CA | In some cases it is desirable to restrict the range of playback for an asset. This parameter determines the start time in seconds into the asset. While this parameter is in effect, it is not possible to go to a position before the defined time. The parameter is primarily intended for use together with the duration parameter. NOTE! Only implemented for RTSP type servers This parameter determines if the server should avoid playing the entire asset, and selects how much of the asset should be played before reporting end of stream. NOTE! Only implemented for RTSP type servers When this parameter is true, data received before the new PAT/PMT when changing to a new channel is considered valid. On average this gives slightly faster zap times, but can also result in image/video disturbances. This is used to control if the statistics element will precede the CA element. | 0 - XXX s 0 - XXX s true, false true, false | true false | Streamer config, URI Streamer config, URI Streamer config, URI Streamer config, URI | - |
| PARAM_STREAMER_MODE | Used to inform streamer element(s) if the streamer is in atsc mode and hence to conditionally recognize DC-II as a valid video type. | atsc (or null) | - | Streamer Config | - |
| PARAM_SUBTITLE_AUTO_SELECT | Used for enable or disable automatic subtitle selection | Boolean ("true"/"false") | - | MediaPlayer (reading from infobroker) | - |
| PARAM_SUBTITLE_LANGUAGE_PRIO_LIST | Priority list for automatic subtitle language selection | comma separated list of language codes | - | MediaPlayer (reading from infobroker) | - |
| PARAM_SUBTITLE_MODE_PRIO_LIST | Priority list for automatic subtitle mode selection | comma separated list of subtitle modes (DVB, Teletext) | - | MediaPlayer (reading from infobroker) | - |
| PARAM_SUBTITLE_SOCKET_NAME | Information about a subtitle stream. The pid of the stream should be added at the end of the parameter name. Information about a teletext stream. The pid of the stream should be added at the end of the parameter name. Socket name used by subtitle render to receive subtitles data. | sti XML data (see TMetaTeletextStreamInfo) string | - | Subtitle stream info decoder element. Subtitle stream info decoder element. Subtitle render | Subtitle sink element |
| PARAM_SUBTITLE_TYPE_PRIO_LIST | Priority list for automatic subtitle type selection | comma separated list of subtitle types (normal, hearing_impaired) | - | MediaPlayer (reading from infobroker) | - |
| PARAM_TRANSCODER_CONFIG | The Transcoder input parameters. PARAM_INPUT_STREAM_TYPE PARAM_INPUT_VIDEO_PID PARAM_INPUT_AUDIO_PID PARAM_INPUT_PCR_PID PARAM_INPUT_VIDEO_FORMAT PARAM_INPUT_AUDIO_FORMAT | - | - | DLNA service. | - |
| PARAM_TUNER_ID | Contains the tuner_id parameter which is part of the uri to specify which tuner should be used to tune to a QAM channel. | - | - | Streamer core | - |
| PARAM_USE_PROGRAM_CACHE | Controls if the Program Cache should be used. | true, false | false | Typically a source element that want cached PMT:s (like dvb) | - |
| PARAM_VIDEO_BIT_RATE | This parameter contains the video bitrate. | A string. | - | Application | - |
| PARAM_VIDEO_FRAME_RATE | This parameter contains the video frame rate. | A string. | - | Application | - |
| PARAM_VIDEO_RESOLUTION_X | This parameter contains the video width. | A string. | - | Application | - |
| PARAM_VIDEO_RESOLUTION_Y | This parameter contains the video height. | A string. | - | Application | - |
| STATISTICS_BUFFER_OVERRUN | The number of buffer overruns. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_BUFFER_UNDERRUN | The number of buffer underruns. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_RESET | Used for reseting all statistics. A value of 1 indicate that the statisics should be reset. | 0, 1 | - | Any. | - |
| STATISTICS_TIME_PLAYING | The total playing time in state playing. | 0 - XXX ms | - | Statistics element. | - |
| STATISTICS_TIME_TOTAL | The total playing time from open to now. | 0 - XXX ms | - | Statistics element. | - |
| STATISTICS_TS_AV_OUT_OF_SYNCS | The number of a/v unsync seen by the streamer when playing. This value will have the same value as STATISTICS_TS_AV_OUT_OF_SYNCS. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_TS_DECODING_ERRORS | The number of times the video decoder has decodeing errors. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_TS_DUPLICATE_PACKETS | The number of duplicate TS packets seen by the streamer. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_TS_ERROR_PACKETS | The number of corrupted TS packets seen by the streamer. Should probably always be 0. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_TS_LOST_PACKETS | The number of lost TS packets seen by the streamer. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_TS_TOTAL_BYTES | The number of bytes seen by the streamer including TS headers. | 0 - XXX Bytes | - | Statistics element. | - |
| STATISTICS_TS_TOTAL_BYTES_PLAYED | The number of bytes seen by the streamer when playing. This value will have the same value as STATISTICS_TS_TOTAL_BYTES. | 0 - XXX Bytes | - | Statistics element. | - |
| STATISTICS_TS_TOTAL_PACKETS | The number of TS packets seen by the streamer. | 0 - XXX | - | Statistics element. | - |
| STATISTICS_URL | The URL to the stream. | URL | - | Statistics element. | - |